Description
BMW iX Sport M60 Bumper Step PPF Kit
This BMW iX Sport M60 bumper step PPF kit provides focused coverage for the pictured rear loading ledge. Paint protection film adds a sacrificial surface where bags and other items may brush the painted ledge during loading and unloading. This is a limited-area kit, not a full rear bumper wrap or a package for the vehicle’s front panels.
The product image shows one broad, shallow curved strip alongside a BMW iX Sport M60 label. Use that outline to compare the intended coverage with your vehicle. The blue patterned illustration identifies the pictured piece; it does not indicate a printed blue finish on the supplied film.
Vehicle, Year and Trim Confirmation
The current title and vehicle information list BMW iX model years 2022, 2023, 2024 and 2025. The title uses Sport M60, while the original trim line reads iX – Sport – M60 and the product image carries corresponding wording. These existing references are retained without expanding the listing to other models, years or configurations.
Grouped year and trim references should not be taken as independent confirmation that every named configuration uses the same pattern in every listed year. Confirm your exact model year, equipment and rear loading-ledge shape before ordering. Ask the seller to clarify the intended pattern if your vehicle differs from the illustrated application or if the Sport/M60 wording leaves your configuration uncertain.
Included Coverage
The illustrated kit is a single strip for the bumper step at the rear loading ledge. Compare its shallow curve and end shapes with the actual surface to be protected. The image does not show coverage for the full bumper face, lower bumper, tailgate or surrounding panels, and additional pieces should not be assumed.
Precut film can leave intentional margins at panel edges and may not cover every contour. Compare the piece with its backing still attached before starting application. If the outline, dimensions or edge placement do not match the intended ledge, stop and request clarification instead of stretching or trimming an uncertain pattern to force a fit.
Film Choices and Appearance
The available options on this listing are ProFusion 8 Mil, STEK Matte, Avery Supreme Defense, 3M Pro 100 Series, 3M Pro G200 and STEK Hydrophobic. Select the material that suits your preferred appearance and the information provided for that specific product. Consider how a matte finish will look next to the surrounding paint before choosing it.
Film thickness, finish, surface properties, maintenance instructions and warranty terms can vary. Consult the selected manufacturer’s information rather than assuming identical features or self-healing behavior across every option. Paint protection film does not prevent every scratch, impact or paint defect, and the pictured kit does not provide protection for unpictured areas.
Preparation and Application
Inspect the intended ledge for paint damage, contamination, previous repairs and existing coatings. Film requires a suitable, properly prepared surface and will not correct underlying paint problems. Follow the chosen manufacturer’s preparation, application and curing instructions, including its guidance on cleaning products, solutions and working conditions.
Check the pattern and alignment before removing the backing. Placement and edge finishing require care on a curved loading ledge. Professional application is an option if you are unfamiliar with the material or uncertain about surface suitability. Do not proceed with unconfirmed fitment or an outline that does not match your vehicle.
Care and Ordering Checklist
After application, follow the selected film manufacturer’s curing and cleaning guidance. Avoid abrasive tools and concentrated pressure at film edges. Inspect the protected area periodically and seek advice if an edge lifts or contamination becomes trapped underneath.
Before checkout, confirm your BMW iX year and Sport/M60 configuration, compare the illustrated strip with the rear loading ledge and choose your preferred film. Order for the coverage shown, not for unpictured panels or assumed compatibility with another version of the vehicle.
Additional information
| BMW iX | 2022 2023 2024 2025 |
|---|
FAQs

PPF Installation Toolkit
Get everything you need for a smooth and professional paint protection film (PPF) installation. This basic toolkit includes:
-
2 Spray Bottles — for Slip Solution and TAC Solution for easy application
-
Pink PPF Squeegee — Designed for precision and scratch-free installation
-
Microfiber Towel — Soft, lint-free, and perfect for cleanup
Related products
-
2021.5-2024 Tesla Model S-Plaid Precut Paint Protection Kit – Bumper Step
$49.99 Select options Quick ViewRated 5.00 out of 51 -
2016-2021 Tesla Model S Precut Paint Protection PPF Kit – Bumper Step
$39.99 Select options Quick ViewRated 5.00 out of 51



Reviews
There are no reviews yet.