HomeShopPaint Protection / Clear Bra KitsFull Doors2020-2023 Porsche 718 Cayman GT4 Precut Paint Protection Kit PPF – Full Doors
2020-2023 Porsche 718 Cayman GT4 Precut Paint Protection Kit PPF – Full Doors

2020-2023 Porsche 718 Cayman GT4 Precut Paint Protection Kit PPF – Full Doors

$289.89

Paint Protection: Full Doors

Paint Protection: Full Doors

    If you're searching for a particular brand not listed, kindly reach out to us via email.

  • Please provide the vehicle's VIN number to register the warranty. Please read FAQ for more information.

  • You need to be logged in to upload files

    To expedite processing, please provide pictures of the doors, this way we can confirm the cuts. Example: We would need to confirm, emblems, door handles, molding, side mirrors on some of the vehicle. Note:Please include both sides of your vehicle.Max file size: 10 MBPermitted file types: jpg jpeg jpe gif png

Product total

Options total

Grand total

Add to wishlist
Category:

Description

Full Doors protection for the 2020–2023 Porsche 718 Cayman GT4

This precut paint protection film (PPF) kit is listed for the full doors of the 2020–2023 Porsche 718 Cayman GT4. The supplied product artwork shows two door-panel pieces, one for each side of the coupe. It is a door-only kit: it does not list the front bumper, hood, fenders, mirrors, roof, A-pillars, rocker panels, or rear panels as included coverage. Match the pictured pattern to your vehicle before ordering, especially if door handles, trim, badges, or other details differ.

Door paint is exposed to everyday contact and road use. A properly fitted PPF layer can help reduce wear from light scuffs, minor abrasion, and road debris on the covered surfaces while keeping the original paint visible. Film is a protective layer, not a guarantee against every chip, scratch, impact, or environmental mark. Coverage applies only where the supplied pieces are installed.

What this Full Doors kit includes

The kit is cut for the two full exterior door-panel areas shown in the listing image for the Porsche 718 Cayman GT4. The artwork depicts separate left- and right-side door shapes, with openings and contours associated with the pictured doors. Confirm the pattern against photos of both sides of your actual vehicle; visual similarities between model years or trims do not establish that every cutout is identical. The kit does not become a full-body or full-front kit simply because the selected film can be used elsewhere.

Precut pieces can reduce the amount of trimming needed at the vehicle, but careful surface preparation, alignment, handling, and finishing are still important. Edge wrapping is offered where applicable; what can be wrapped depends on the panel and installation conditions. The final appearance and protection depend on the selected film, the vehicle condition, and installation quality. No installation difficulty or effortless-installation claim is made here.

Choose the film that fits your finish

The product offers ProFusion 8 Mil, ProFusion 10 Mil, Avery Supreme Defense, 3M Pro 100 Series, 3M Pro G200, S.T.E.K Hydrophobic, and S.T.E.K Matte choices. Select the available film option that matches the appearance and product characteristics you want. Matte film changes the visible finish; compare it with your paint and any existing film before ordering. Film properties and warranties vary by brand and line, so review the applicable manufacturer’s information for the exact choice rather than assuming every option has the same performance.

The listed price is for the base kit before any option adjustment shown at checkout. The selected brand, any applicable edge-wrapping choice, and order details should be checked in the product form before adding the kit to your cart. If you need a film brand not shown, contact the store before ordering rather than assuming it can be substituted later.

Confirm your exact 718 Cayman GT4 fitment

Enter the vehicle year, make, model, and trim in the required product field. The listing spans 2020, 2021, 2022, and 2023, but a year range alone does not confirm the shape of a particular vehicle’s doors. Provide clear photos of both doors, including handle areas, trim, moldings, emblems, and any details that may affect the cut. The optional VIN field can assist with vehicle identification and the stated warranty-registration process; consult the store FAQ for its current terms.

Before installation, compare every supplied piece with the corresponding door and stop if an opening, edge, or contour does not match. Ask the store to review an uncertain fit before applying film. The existing product image filename references 2020–2022 even though this listing and its visible fitment include 2023; confirm a 2023 vehicle’s pattern with the store if ordering that year. This note does not expand or reduce the published fitment range.

Preparation, installation, and care

Clean and inspect the paint thoroughly before film application. Existing chips, scratches, contamination, and prior repairs may remain visible beneath clear film and can affect adhesion or appearance. Follow the installation guidance and material instructions for the film you select; use a qualified installer if you are not comfortable preparing and applying precut PPF to large door panels. Do not stretch or trim a piece to force a visibly incorrect pattern onto the car.

After installation, follow the film manufacturer’s curing, washing, and maintenance instructions. Allow the film to settle as directed, use suitable cleaning products, and check wrapped or exposed edges during routine care. This Full Doors kit is intended to protect the two pictured exterior door areas while retaining the Porsche 718 Cayman GT4’s painted finish underneath; it is not a substitute for careful driving, maintenance, or protection of unfilmed panels.

Additional information

Porsche 718 - Cayman GT4

2020,2021,2022,2023

Reviews

There are no reviews yet.

Be the first to review “2020-2023 Porsche 718 Cayman GT4 Precut Paint Protection Kit PPF – Full Doors”

Your email address will not be published. Required fields are marked *

FAQs

PPF Film Options
PPF Installation Tools:

PPF TOOLKIT BASIC KIT PPF Installation Toolkit

Get everything you need for a smooth and professional paint protection film (PPF) installation. This basic toolkit includes:

  • 2 Spray Bottles — for Slip Solution and TAC Solution for easy application

  • Pink PPF Squeegee — Designed for precision and scratch-free installation

  • Microfiber Towel — Soft, lint-free, and perfect for cleanup

FAQ

GUIDANCE ON SELECTING OPTIONS FOR YOUR PRECUT PAINT PROTECTION KIT

Select Paint Protection Film Brand: *

Please select your preferred paint protection brands.
You can view the specifications of each film, including properties and warranty information, in the second image adjacent to the precut image in the additional gallery.

​

Parking Sensors: *

Many newer or older vehicles come equipped with parking sensors—small round sensors attached to the front bumper.
Please indicate whether your vehicle has parking sensors or not. Alternatively, if your parking sensors are flush with the bumper, you can select "NO" to cover them.
This way, you can protect the parking sensors while ensuring their functionality. The proximity of the parking sensors will still work once the PPF material dries.

Edge Wrapping *

Edge wrapping is included on specific panels such as the hood, top of the fenders, and certain areas around bumpers. For example, it won't be present on all panels; rather, it's applied based on the selected patterns for your vehicle's make by the kit manufacturer. This helps prevent peeling and ensures easy installation.

We also provide custom wrapping options for an additional cost. If you wish to add or remove wrapping from specific places, our team is available to assist you. Please email us before purchasing your kit.

Vehicles: Year | Make | Model | Trim *

Kindly provide the Year, Make, Model, and Trim of your vehicle. Our team will cut a precut kit tailored to your vehicle's specified trim.

Vehicle Pictures:

While not mandatory, providing pictures of your exact vehicle significantly expedites the process. This allows us to confirm details such as trim, emblems, moldings, parking sensors, etc. We kindly request that you provide images of your vehicle to ensure accurate cuts. Although we are familiar with various makes and models, some vehicles may have additional features like sensors, fender flares, bumper trims, etc.

If the kit manufacturer offers multiple vehicle trim options, submitting pictures becomes a requirement. If you haven't provided an image during the kit purchase, our team will reach out to request one. Please note that we cannot process your order promptly until we receive the necessary image.

Related products

Click outside to hide the comparison bar
Compare