2020-2021 Toyota C-HR Precut Paint Protection Kit – A-Pillars + Rooftop
$89.99
Description
2020–2021 Toyota C-HR Precut PPF Kit
This Toyota C-HR paint protection film kit is listed for model years 2020 and 2021 in LE, XLE and Limited trims. It supplies precut film for the pattern illustrated on this page. Review the complete diagram and confirm your exact vehicle before ordering; the A-Pillars + Rooftop name does not mean a complete roof panel is included.
Paint protection film adds a protective layer over the compatible painted surfaces it covers. It can help reduce light abrasion and exposure to small road debris, but it cannot prevent every chip, scratch or impact. Protection is limited to the installed film area, and existing paint damage is not repaired by applying film.
Review the Pictured Coverage
The diagram shows a broad upper band with a straighter top edge and curved lower edge, together with two long, narrow side strips that angle outward and end in pointed tips. Compare these outlines, including the upper corners and lower ends, with the areas you want to protect. The blue geometric texture identifies the illustrated pattern; it is not a printed design on the supplied film.
No full-roof sheet, windshield glass film, hood, bumper, fender, mirror, door or rear-panel coverage is implied. Do not infer additional pieces, dimensions or wrapped edges from the vehicle photograph. Coverage follows the pictured precut pattern, not every surface visible in the photo.
Confirm the Listed Vehicle Application
The existing application remains 2020–2021 Toyota C-HR LE, XLE and Limited. The vehicle photograph and the advertised model years require a pattern-specific fitment check; the photo alone should not be treated as confirmation for your exact vehicle. Contact us before purchase to confirm the pictured pattern for your model year and trim.
A similar vehicle appearance does not establish interchangeable patterns. This listing does not extend compatibility to earlier or later years, other Toyota models or unlisted configurations. Replacement panels, aftermarket trim, accessories and repaired surfaces may also affect placement. Provide your model year, trim and this product link when asking about fitment, with photos of the relevant areas if helpful.
Choose Your Paint Protection Film
The available selector offers ProFusion 8 Mil, ProFusion 10 Mil, Avery Supreme Defense, 3M Pro 100 Series, 3M Pro G200, S.T.E.K Hydrophobic and S.T.E.K Matte. Select your preferred film and review the displayed product total, option charge and grand total before adding the kit to your cart. The chosen option determines the material supplied for the pictured pattern.
Film properties vary by product. Check the exact selection for finish, thickness, care requirements and manufacturer terms. Do not assume every option has identical self-healing, stain-resistance or hydrophobic characteristics. Matte film can change the appearance of covered paint relative to adjacent uncovered areas. Installation service, paint correction and ceramic coating are not included by implication.
Preparation, Application and Care
Inspect the supplied pieces and the intended vehicle surfaces before application. Paint should be clean, sound and suitable for adhesive film. Remove contamination using compatible methods, and check the readiness of any repaired or repainted area. Film is not a remedy for peeling clear coat, corrosion or existing scratches.
Follow the selected film manufacturer’s application and maintenance guidance. Precut pieces still require careful handling and accurate alignment. Avoid forcing a mismatched shape around trim or onto an unsuitable surface. A qualified installer can help assess preparation and placement. After application, follow the appropriate curing and washing instructions and avoid lifting edges during cleaning.
Check Your Order Before Purchase
Confirm the listed 2020–2021 C-HR application, exact trim, pictured coverage and selected film before checkout. Resolve the photograph/model-year question with us before relying on the pattern for your vehicle. This is a limited-area precut kit, not a full roof or whole-vehicle protection package.
Review our FAQ for general ordering information. If any outline, configuration or material choice is unclear, contact us with this product link and your vehicle details before ordering.
Additional information
| Toyota C-HR | 2020, 2021 |
|---|
FAQs
PPF Installation Toolkit
Get everything you need for a smooth and professional paint protection film (PPF) installation. This basic toolkit includes:
-
2 Spray Bottles — for Slip Solution and TAC Solution for easy application
-
Pink PPF Squeegee — Designed for precision and scratch-free installation
-
Microfiber Towel — Soft, lint-free, and perfect for cleanup
Reviews
There are no reviews yet.