2019-2021 Ford Fusion – Hybrid Paint Protection Kit A Pillars + Rooftop
$89.99
Description
Ford Fusion Hybrid Precut Paint Protection Film
This Ford Fusion Hybrid PPF kit is offered for the specific pattern illustrated on this page. It is a targeted paint-protection option, not a full-front kit or a complete vehicle wrap. The product title lists 2019–2021. The listed 2021 application remains unverified, so confirm your exact vehicle and the pictured pattern before ordering.
Precut paint protection film places a protective layer over the painted areas covered by the selected pattern. It can help reduce everyday surface wear from road debris and light contact, but it cannot prevent every chip, scratch or impact. Protection applies only where film is installed; nearby uncovered paint remains exposed.
Pictured Pattern and Coverage
The artwork is labeled Ford Fusion Hybrid SE – SEL – Titanium and shows a white sedan beside a shallow upper band and two long narrow sloping side shapes with angular widened lower ends. Use these illustrated shapes to review the kit with your installer. Confirm the supplied pieces and their placement rather than inferring an exact piece count from the outlines. The vehicle photograph is a reference image, not a diagram indicating that every visible panel is included.
Although the existing coverage wording includes A-Pillars + Roof Top, do not interpret that wording as full-roof coverage or coverage beyond the illustrated pieces. Confirm the exact placement, boundaries and edge treatment of each piece before purchase. This listing does not include a hood, bumper, fenders, doors, mirrors or a whole-car ceramic-coating service unless separately ordered under another product.
Vehicle and Year Confirmation
The title, vehicle finder and additional information list 2019–2021 Ford Fusion Hybrid. Their agreement is not proof of model-year compatibility. The listed 2021 application remains unverified and requires supplier confirmation before purchase. The artwork contains no printed years; the year embedded in its filename is not independent fitment evidence. Existing listing years and the image are retained without extending the application. Obtain pattern-specific confirmation for your vehicle before ordering; no earlier or later application is implied.
Provide your model year, market, exact trim and any relevant exterior changes when requesting a fitment check. Do not assume that a registration year, similar vehicle photograph or a finder result establishes compatibility. The existing description names Hybrid, SE, SLE and Titanium, while the artwork names Hybrid SE, SEL and Titanium. The artwork spelling is SEL, not SLE; confirm the exact trim rather than treating SLE as a separately verified application. Do not extend that application to another Fusion powertrain, trim or body configuration based on a similar name or photograph. The existing 2019–2021 site entries are retained as listing references, not confirmation that a corresponding model or compatible pattern exists for every year shown. In particular, do not order for 2021 without documented model-year and pattern confirmation from the supplier. Confirm the precise trim and body details rather than extending the pictured application to another package or body update. Have your installer compare the intended covered areas and pattern boundaries with your exact vehicle before application.
Choose Your Film Option
Select from the film choices currently shown under A-Pillar Film Options. The available selector lists ProFusion 8 Mil, ProFusion 10 Mil, Avery Supreme Defense, 3M Pro 100 Series, 3M Pro G200, S.T.E.K Hydrophobic and S.T.E.K Matte. Check the chosen option and displayed order total before adding the kit to your cart.
Film construction, finish, care instructions and warranty terms depend on the selected product. Do not assume that every option has identical thickness, gloss, hydrophobic behavior or self-healing characteristics. If matching an existing installation, confirm the precise film and finish first; a similar brand name alone does not ensure a visual match.
Preparation and Installation Planning
Precut film still requires careful preparation, alignment and application. Have an experienced installer assess the painted surfaces and compare the pattern with your vehicle before removing the liner. Existing chips, loose paint, repairs, coatings or contamination can affect the finished result and should be discussed before installation begins.
Follow the selected film manufacturer’s preparation and application instructions. Do not force an uncertain pattern to fit or assume that stretching can correct an application mismatch. If the shape, year or trim is in doubt, stop and obtain confirmation before applying the film. Installation labor, preparation products and tools should not be assumed to be included in this kit.
Care and Pre-Order Checklist
After installation, follow the film manufacturer’s curing and cleaning guidance. Use compatible cleaning products and avoid aggressive scrubbing or directing concentrated pressure at film edges. Inspect contamination promptly and seek product-specific advice if a mark does not clean away normally. Film is a protective surface, not a repair for damage already present underneath.
Before checkout, confirm the Ford Fusion Hybrid application, resolve any year or trim discrepancy, compare the illustrated pieces with the intended coverage, and review your film selection. Contact the store with these details if anything is unclear. Order only after the pattern and application have been confirmed for your vehicle.
Additional information
| Ford Fusion Hybrid | 2019,2020, 2021 |
|---|
FAQs
PPF Installation Toolkit
Get everything you need for a smooth and professional paint protection film (PPF) installation. This basic toolkit includes:
-
2 Spray Bottles — for Slip Solution and TAC Solution for easy application
-
Pink PPF Squeegee — Designed for precision and scratch-free installation
-
Microfiber Towel — Soft, lint-free, and perfect for cleanup
Reviews
There are no reviews yet.