Description

2018 – 2021 Hyundai Kona – Essential, Perferred, SE, SEL, Limited, Ultimate PPF kit Paint Protection Film (PPF) Hyundai Kona PPF DIY Kit – Full Front + A

Name: 2018-2021 Hyundai Kona Precut Paint Protection Kit - Full Front ( New ) – Precut PPF Store | Precut Paint Protection | Precut window Tint Kits
Brand: Stek Dynoshield
Price: 499.56 USD
Availability: InStock

Pillars + Rooftop

Included:
FULL BUMPER
FULL HOOD
FULL FENDERS
HEADLIGHTS
MIRRORS
A-PILLARS + ROOFTOP

Paint Protection Film Hyundai Kona All Terms Pre Cut PPF Kit Film.

PPF 8 Mil Paint Protection Film Store

What’s the best solution? Ultimate Protection for Your Vehicle – Hyundai Kona PPF Kit.

Paint Protection Film is a transparent, urethane material that can be applied to any exterior painted surface on your vehicle In short, automotive Paint Protection Film preserves the quality of your car’s paint by reducing the risk of multiple kinds of damage, such as…

Chips and scratches caused by rocks and road debris
Swirl marks created during washing
Chemical stains caused by acidic contaminants
Chemical etch marks caused by acidic contaminants
Hard water spots from mineral deposit
Oxidation (fading) from UV exposure

Paint Protection Film is applied first to the portions of your vehicle that will be most susceptible to rock chips or scratches from road debris.
Since Ceramic Coating does not protect against this kind of damage, it’s important to apply Paint Protection Film to these areas. This often includes the front bumper, hood, fenders, side mirrors, rocker panels, and the rear wheel arch.

Once the most vulnerable areas are protected with Paint Protection Film, your whole car receives Ceramic Coating. The coating will bond to both the vehicle’s factory paint and the film that has already been applied.
When applied on top of the film, the coating will provide an additional layer of protection from chemical etching and stains. It will also help keep the film clean and free from contaminants, which will lengthen the life of the film.

Fits: Essential, Perferred, SE, SEL, Limited, Ultimate

Are All PPF Products Identical?

Absolutely NOT. In fact, the modern crop of car paint protection film is separated into three categories.

Entry Level PPF

The generic clear bra is the entry-level solution to produce invisible protection.
These urethane films are usually made overseas and are marketed under several different brand names. It’s an older formulation that does a fine job of protecting your vehicle from rock chips and other small debris strikes, but tends to yellow, discolor, and age quickly due to excessive exposure to outdoor elements – especially UV exposure.

Self-Healing PPF

The most popular type of automotive paint protection film is the self-healing variant.
They are made by several popular companies like 3M, Suntek, PPF 8 Mil paint protection film, and others.
These blends solved the yellowing issues by infusing them with better formulated top coatings, which helps to block UV rays instead of absorbing them into the material.

If they are scratched or pitted due to small debris strikes to prone areas (like the front end, side mirrors, and fenders) – a professional auto salon can easily repair them by using a heat gun and trained techniques.

Instant Healing PPF

The top-shelf paint protection films are those infused with nanotechnology that allows them to fill small imperfections on the car’s paint surface – and instantly heal if scratched on the top layer.
This segment is new – in fact, debuting in 2019 with the launch of Ceramic Pro Kavala instant healing PPF.

Paint protection film installation is – on average, the most expensive of the protective products on the market today.
The cost can range from $700 for your entry-level clear bra installation (which is just the front or high-impact areas of your vehicle) to approaching $4,000 for a full vehicle PPF treatment.

One of the major cost factors with most PPF’s is prep work, or what’s called paint correction. Most paint protection urethane film will cover and enhance what’s underneath.
They don’t mask tiny scratches, swirl marks, or faded or light oxidation on vehicle paint. Paint correction can contribute to 1/3rd of the overall cost of the paint protection film installation.

However, paint protection films will last and hold up for 7 to 10 years. If you opt for the top-shelf instant healing paint protection film, the warranties can eclipse 10 years.
Adding a professional nano-ceramic coating to the top of the PPF can extend the warranty to a lifetime and keep the original paint in prime condition.

So, the question you need to ask is – if you didn’t have to pay for PPF – would you have it installed for free? After looking at the protective qualities posted above, I’d suggest that 99% of us would clearly answer YES to this question.

The next question you should ask is whether you can afford a PPF. When you consider the cost of other paint protection products, like wax, paint sealants, and ceramic coatings, the maintenance and upkeep to keep them in top shape, and the cost of repairing rock chip damage – over the same length of time the PPF will last, it’s actually more affordable than you’d think.

In the end, you’ll have to determine whether a paint protection film is worth it – for your individual application. Here are a few questions to consider that will help you with this important decision.

How To:
https://www.youtube.com/watch?v=1z8LzEoU-NM

www.teslamotorsclub.com

www.PrecutPPF.store

Additional information

Weight	6 lbs
Dimensions	60 × 3 × 3 in
Brand	Stek Dynoshield

Reviews

There are no reviews yet.

Be the first to review “2018-2021 Hyundai Kona Precut Paint Protection Kit – Full Front ( New )”

FAQs

FAQ

GUIDANCE ON SELECTING OPTIONS FOR YOUR PRECUT PAINT PROTECTION KIT

Select Paint Protection Film Brand: *

Please select your preferred paint protection brands.
You can view the specifications of each film, including properties and warranty information, in the second image adjacent to the precut image in the additional gallery.

Parking Sensors: *

Many newer or older vehicles come equipped with parking sensors—small round sensors attached to the front bumper.
Please indicate whether your vehicle has parking sensors or not. Alternatively, if your parking sensors are flush with the bumper, you can select "NO" to cover them.
This way, you can protect the parking sensors while ensuring their functionality. The proximity of the parking sensors will still work once the PPF material dries.

Edge Wrapping *

Edge wrapping is included on specific panels such as the hood, top of the fenders, and certain areas around bumpers. For example, it won't be present on all panels; rather, it's applied based on the selected patterns for your vehicle's make by the kit manufacturer. This helps prevent peeling and ensures easy installation.

We also provide custom wrapping options for an additional cost. If you wish to add or remove wrapping from specific places, our team is available to assist you. Please email us before purchasing your kit.

Vehicles: Year | Make | Model | Trim *

Kindly provide the Year, Make, Model, and Trim of your vehicle. Our team will cut a precut kit tailored to your vehicle's specified trim.

Vehicle Pictures:

While not mandatory, providing pictures of your exact vehicle significantly expedites the process. This allows us to confirm details such as trim, emblems, moldings, parking sensors, etc. We kindly request that you provide images of your vehicle to ensure accurate cuts. Although we are familiar with various makes and models, some vehicles may have additional features like sensors, fender flares, bumper trims, etc.

If the kit manufacturer offers multiple vehicle trim options, submitting pictures becomes a requirement. If you haven't provided an image during the kit purchase, our team will reach out to request one. Please note that we cannot process your order promptly until we receive the necessary image.

Cart

2018-2021 Hyundai Kona Precut Paint Protection Kit – Full Front ( New )

Full Front